TargetSmart
Overview
TargetSmart provides access to voter and consumer data for the progressive community. Currently, there are two TargetSmart services that are supported by two Parsons classes, each requiring separate credentials:
TargetSmartAPI
: Single record lookup with HTTPS. This class provides methods to support searching for individual people, voters, and district information for a geographic location.TargetSmartAutomation
: Bulk record matching with SFTP. This class provides general methods for processing files instead of individual records.
Note
- Authentication
Log in to My TargetSmart to access authentication credentials. You will need an API key to use the
TargetSmartAPI
class, and an SFTP username and password to use theTargetSmartAutomation
class.For more information, see the API documentation.
TargetSmart
Quickstart
To instantiate TargetSmartAPI
, you can either store your API Key as the environmental variable
TS_API_KEY
, or pass it in as an argument:
from parsons import TargetSmartAPI
# First approach: Store API key as an environmental variable
ts_api = TargetSmartAPI()
# Second approach: Pass API key as an argument
ts_api = TargetSmartAPI(api_key='my_api_key')
You can then call various endpoints:
# Search for a person record using an email address
ts_api.data_enhance(search_id='test@email.com', search_id_type='email')
# Search for district information using an address
ts_api.district(search_type='address', address='123 test st, Durham NC 27708')
API
- class parsons.TargetSmartAPI(api_key=None)[source]
- data_enhance(search_id, search_id_type='voterbase', state=None)
Searches for a record based on an id or phone or email address
- Args:
- search_id: str
The primary key or email address or phone number
- search_id_type: str
One of
voterbase
,exacttrack
,abilitec_consumer_link
,phone
,email
,smartvan
,votebuilder
,voter
,household
.- state: str
Two character state code. Required if
search_id_type
ofsmartvan
,votebuilder
orvoter
.
- Returns
- Parsons Table
See Parsons Table for output options.
- district(search_type='zip', address=None, zip5=None, zip4=None, state=None, latitude=None, longitude=None)
Return district information based on a geographic point. The method allows you to search based on the following:
Search Type
Search Type Name
Required kwarg(s)
Zip Code
zip
zip5
,zip4
Address
address
address
Point
point
latitude
,longitude
- Args:
- search_type: str
The type of district search to perform. One of
zip
,address
orpoint
.- address: str
An uparsed full address
- zip5: str
The USPS Zip5 code
- zip4: str
The USPS Zip4 code
- state: str
The two character state code
- latitude: float or str
Valid latitude floating point
- lontitude: float or str
Valid longitude floating point
- Returns:
- Parsons Table
See Parsons Table for output options.
- phone(table)
Match based on a list of 500 phones numbers. Table can contain up to 500 phone numbers to match
- Args:
- table: parsons table
See Parsons Table. One row per phone number, up to 500 phone numbers.
- Returns:
See Parsons Table for output options.
- radius_search(first_name, last_name, middle_name=None, name_suffix=None, latitude=None, longitude=None, address=None, radius_size=10, radius_unit='miles', max_results=10, gender='a', age_min=None, age_max=None, composite_score_min=1, composite_score_max=100, last_name_exact=True, last_name_is_prefix=False, last_name_prefix_length=10)
Search for a person based on a specified radius
- Args:
- first_name: str
One or more alpha characters
- last_name: str
One or more alpha characters
- middle_name: str
One or more alpha characters
- name_suffix: str
One or more alpha characters
- latitude: float
Floating point number (e.g. 33.738987255507)
- longitude: float
Floating point number (e.g. -116.40833849559)
- address: str
Any geocode-able address
- address_type: str
reg
for registration (default) ortsmart
for TargetSmart- radius_unit: str
One of
meters
,feet
,miles
(default), orkilometers
.- max_results: int
Default of
10
. An integer in range [0 - 100]- gender: str
Default of
a
. One ofm
,f
,u
,a
.- age_min: int
A positive integer
- age_max: int
A positive integer
- composite_score_min: int
An integer in range [1 - 100]. Filter out results with composite score less than this value.
- composite_score_max: int
An integer in range [1 - 100]. Filter out results with composite score greater than this value.
- last_name_exact: boolean
By default, the full last name is used for finding matches if the length of the last name is not longer than 10 characters. As an example, “anders” is less likely to match to “anderson” with this enabled. Disable this option if you are using either
last_name_is_prefix
orlast_name_prefix_length
.- last_name_is_prefix: boolean
By default, the full last name is used for finding matches. Enable this parameter if your search last name is truncated. This can be common for some client applications that for various reasons do not have full last names. Use this parameter along with
last_name_prefix_length
to configure the length of the last name prefix. This parameter is ignored iflast_name_exact
is enabled.- last_name_prefix_length: int
By default, up to the first 10 characters of the search last name are used for finding relative matches. This value must be between 3 and 10. This parameter is ignored if last_name_exact is enabled.
- Returns
- Parsons Table
See Parsons Table for output options.
- voter_registration_check(first_name=None, last_name=None, state=None, street_number=None, street_name=None, city=None, zip_code=None, age=None, dob=None, phone=None, email=None, unparsed_full_address=None)
Searches for a registered individual, returns matches.
A search must include the at minimum first name, last name and state.
- Args:
- first_name: str
Required; One or more alpha characters. Trailing wildcard allowed
- last_name: str
Required; One or more alpha characters. Trailing wildcard allowed
- state: str
Required; Two character state code (e.g.
NY
)- street_number: str
Optional; One or more alpha characters. Trailing wildcard allowed
- street_name: str
Optional; One or more alpha characters. Trailing wildcard allowed
- city: str
Optional; The person’s home city
- zip_code: str
Optional; Numeric characters. Trailing wildcard allowed
- age; int
Optional; One or more integers. Trailing wildcard allowed
- dob; str
Numeric characters in YYYYMMDD format. Trailing wildcard allowed
- phone; str
Integer followed by 0 or more * or integers
- email: str
Alphanumeric character followed by 0 or more * or legal characters (alphanumeric, @, -, .)
- unparsed_full_address: str
One or more alphanumeric characters. No wildcards.
- Returns
- Parsons Table
See Parsons Table for output options.
:inherited-members:
Automation
Quickstart
To instantiate TargetSmartAutomation
, you can either store your SFTP username and password
as the environmental variables TS_SFTP_USERNAME
and TS_SFTP_PASSWORD
, or pass them in as
keyword arguments:
from parsons import TargetSmartAutomation
# First approach: Store SFTP username and password as environmental variables
ts_auto = TargetSmartAutomation()
# Second approach: Pass SFTP username and password as arguments
ts_auto = TargetSmartAutomation(username='my_sftp_username', password='my_sftp_password')
You can then call various endpoints:
# Check the status of a match job
ts_auto.match_status(job_name='my_job_name')
# Remove all files for the match job
ts_auto.remove_files(job_name='my_job_name')
API
- class parsons.TargetSmartAutomation(sftp_username=None, sftp_password=None)[source]
- match(table, job_type, job_name=None, emails=None, call_back=None, remove_files=True)[source]
Match a table to TargetSmart using their bulk matching service.
Warning
- Table Columns
The automation job does not validates the file by column indexes rather than columns names. So, if it expected 10 columns and you only provide 9, it will fail. However, if you provide 10 columns that are out of order, the job will succeed, but the records will not match.
- Args:
- table: Parsons Table Object
A table object with the required columns. (Required columns provided be TargetSmart)
- job_type: str
The match job type. This is case sensitive. (Match job names provided by TargetSmart)
- job_name: str
Optional job name.
- emails: list
A list of emails that will received status notifications. This is useful in debugging failed jobs.
- call_back: str
A callback url to which the status will be posted. See TargetSmart documentation for more details.
- remove_files: boolean
Remove the configuration, file to be matched and matched file from the TargetSmart FTP upon completion or failure of match.